2005-2008 Yaris · Service Manual BRAKE

DISASSEMBLY

Removal / installation · Vehicles built from Jan 2006


1. REMOVE CYLINDER BOOT

C116883E01
  1. Using a screwdriver with its tip wrapped in protective tape, remove the set ring and cylinder boot from the disc brake cylinder.


2. REMOVE FRONT DISC BRAKE PISTON

G031605E01
  1. Place a shop rag or piece of cloth between the piston and disc brake cylinder.

  1. Apply compressed air to remove the piston from the disc brake cylinder.

    CAUTION:
    Do not place your fingers in front of the piston when applying compressed air.

    NOTICE:
    Do not spatter the brake fluid.


3. REMOVE PISTON SEAL

C116884E01
  1. Using a screwdriver with its tip wrapped in protective tape, remove the piston seal from the disc brake cylinder.

    NOTICE:
    Do not damage the inner surface or piston seal groove of the cylinder.


4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

5. REMOVE FRONT DISC BRAKE BLEEDER PLUG
← REMOVAL (from Jan 2006)INSPECTION (from Jan 2006) →