2005-2008 Yaris · Service Manual BRAKE

REASSEMBLY

Removal / installation · Vehicles built from Nov 2005


1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG

2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

3. INSTALL PISTON SEAL
  1. Apply lithium soap base glycol grease to a new piston seal.

  1. Install the piston seal onto the disc brake cylinder.

    NOTICE:
    Securely install the piston seal into the groove of the disc brake cylinder.


4. INSTALL FRONT DISC BRAKE PISTON
  1. Apply lithium soap base glycol grease to the piston.

  1. C129739E01
    Install the piston into the disc brake cylinder.

    NOTICE:
    1. Do not forcibly install the piston into the disc brake cylinder.
    2. Securely install the cylinder boot into the groove of the piston.

← INSPECTION (from Nov 2005)INSTALLATION (from Nov 2005) →