ON-VEHICLE INSPECTION
Inspection · Vehicles built from Aug 2005
| INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle not Involved in Collision) |
Perform a diagnostic system check (Click here).
With the curtain shield airbag installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the front pillar garnish or roof headlining with a new one:
Any cuts, minute cracks or marked discoloration on the front pillar garnish and roof headlining around the curtain shield airbag.

| INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed) |
![]() ![]() |
- CAUTION:
- For curtain shield airbag removal and installation procedures, see pages Click here and Click here, and carefully follow the correct procedure.
Perform a diagnostic system check (Click here).
With the curtain shield airbag removed from the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the curtain shield airbag with a new one:
- Any cuts, minute cracks or marked discoloration on the curtain shield airbag.
- Any cracks or other damage to the connector.
- Any cuts, minute cracks or marked discoloration on the curtain shield airbag.

