INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT E.F.I. ENGINE COOLANT TEMPERATURE SENSOR |
Check the resistance.

Using an ohmmeter, measure the resistance between the terminals.
- Standard resistance:
Tester Connection
Specified Condition
1 - 2
2.32 to 2.59 kΩ at 20°C (68°F)
1 - 2
0.310 to 0.326 kΩ at 80°C (176°F)
- NOTICE:
- While inspecting the engine coolant temperature sensor as shown in the illustration, do not immerse terminals on the sensor in water. After the inspection, wipe the water off the engine coolant temperature sensor so that the terminals do not get wet.
