INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL PURGE VSV |
Install the purge VSV with the bolt.

- Torque:
- 8.8 N*m{ 90 kgf*cm , 78 in.*lbf }
Connect fuel vapor feed hose No. 1 (b) with the clip.

Connect fuel vapor feed hose No. 2 (c) with the clip.
Connect the purge VSV connector (b).
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
