2005-2008 Yaris · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Aug 2005


INSPECT PURGE VSV

  1. A104801E01
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      1 - 2
      26 to 30Ω at 20°C (68°F)

      If the resistance is not as specified, replace the purge VSV.

  1. Check the operation.

    1. A104802E01
      Check that air does not flow from port E to F.

    2. A104803E01
      Apply battery voltage across the terminals.

    3. Check that air flows from port E to F.
      If the operation is not as specified, replace the purge VSV.

← REMOVAL (from Aug 2005)INSTALLATION (from Aug 2005) →