2005-2008 Yaris · Service Manual ENGINE

PRECAUTION

Precautions · Vehicles built from Nov 2005


1.INJECTOR COMPENSATION CODE

HINT:
  1. Each injector has different fuel injection characteristics. In order to optimize fuel injection performance, the ECM compensates for these differences by adjusting the fuel injection duration of each injector according to its compensation code. Injector compensation codes are unique, 10-digit, alphanumeric values printed on the head portion of each injector.
  2. If an incorrect injector compensation code is input into the ECM, the engine may rattle or engine idling may become rough. In addition, engine failure may occur and the life of the engine may be shortened.

  1. A115972E01
    When an injector is replaced, the injector's compensation code must be input into the ECM (Click here).

  2. When the ECM is changed, all of the existing injector compensation codes must be input into the new ECM (Click here).


2.IGNITION SWITCH EXPRESSIONS
  1. The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

    Expression
    Ignition Switch (position)
    Engine Switch (condition)
    Ignition Switch off
    LOCK
    Off
    Ignition Switch on (IG)
    ON
    On (IG)
    Ignition Switch on (ACC)
    ACC
    On (ACC)
    Engine Start
    START
    Start

← INSTALLATION (from Aug 2005)PARTS LOCATION (from Nov 2005) →