DISASSEMBLY
Removal / installation · Vehicles built from Aug 2005
| 1. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING |
![]() ![]() |
Using SST, remove the front differential case front tapered roller bearing.
- SST
- 09950-00020
09950-00030
- HINT:
- Set the claw of SST to the bearing inner race at the indented part of the differential case.
| 2. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING |
![]() ![]() |
Using SST, remove the front differential case rear tapered roller bearing.
- SST
- 09950-00020
09950-00030
| 3. REMOVE FRONT DIFFERENTIAL RING GEAR |
![]() ![]() |
Place matchmarks on the front differential ring gear and the front differential case.
Remove the 6 bolts.
Using a hammer, remove the front differential ring gear from the front differential case.

| 4. REMOVE FRONT DIFFERENTIAL CASE |
![]() ![]() |
Using a pin punch and hammer, remove the pinion shaft straight pin.
Remove the pinion shaft from the differential case.

Remove the 2 pinion gears, 2 side gears and 4 thrust washers from each gear.




