DISASSEMBLY
Removal / installation · Vehicles built from Aug 2005
| 1.
REMOVE SHIFT LEVER INNER NO.1 |
 |
- Using a pin punch and hammer, remove the shift lever inner No. 1 slotted pin from the shift and select lever shaft.
- HINT:
- Check the orientation of shift lever inner No. 1.
- Using 2 screwdrivers and a hammer, remove the snap ring from the shift and select lever shaft.
- Remove shift lever inner No .1 and the shift interlock plate from the shift and select lever shaft.
| 2.
REMOVE LOCK BALL HOLDER |
 |
Remove the lock ball holder.
| 3.
REMOVE SELECT RETURN COMPRESSION SPRING |
 |
- Remove the select return compression spring from the shift and select lever shaft.
| 4.
REMOVE SELECT SPRING SEAT NO.2 |
 |
- Remove select spring seat No. 2 from the shift and select lever shaft.
| 5.
REMOVE SELECT LEVER SHAFT |
 |
- Remove the bolt.
Remove the select lever shaft from the control shaft cover.
| 6.
REMOVE SELECT INNER LEVER |
 |
- Remove the select inner lever from the control shaft cover.
| 7.
REMOVE SHIFT AND SELECT LEVER SHAFT |
 |
- Using 2 screwdrivers and a hammer, remove the snap ring from the shift and select lever shaft.
- HINT:
- Lifting the control shaft cover up with a piece of rope or the equivalent makes the work easier.
- Remove the shift and select lever shaft with the shift lever boot from the control shaft cover.
Remove the shift lever boot from the shift and select lever shaft.
- Using a small screwdriver, remove the spacer from the shift and select lever shaft.
| 8.
REMOVE SELECT LEVER SHAFT OIL SEAL |
 |
- Using a screwdriver, remove the select lever shaft oil seal from the control shaft cover.
| 9.
REMOVE CONTROL SHAFT COVER OIL SEAL |
 |
- Using a screwdriver, remove the control shaft cover oil seal from the control shaft cover.