REMOVAL
Removal / installation · Vehicles built from Jan 2006
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER |
![]() ![]() |
Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.
| 3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH |
![]() ![]() |
Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end LH.
| 4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH |
![]() ![]() |
Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end RH.
| 5. REMOVE INSTRUMENT CLUSTER FINISH PANEL |
![]() ![]() |
Disengage the 4 claws and 5 clips and remove the instrument cluster finish panel.
| 6. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY |
![]() ![]() |
Disengage the 2 claws and 4 clips and remove the instrument cluster finish panel center.
| 7. REMOVE AIR CONDITIONING PANEL ASSEMBLY |
![]() ![]() |
Disengage the 4 clips and 2 claws and remove the air conditioning panel.
Disconnect the 3 connectors and 4 clamps.

| 8. DISCONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY |
![]() ![]() |
Disconnect the air mix control cable from the clamp.
Disengage the 2 claws and disconnect the air mix damper control cable.
| 9. DISCONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY |
![]() ![]() |
Disengage the 2 claws and disconnect the defroster damper control cable.
| 10. DISCONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY |
![]() ![]() |
Disengage the 2 claws and disconnect the air inlet damper control cable.









