DISASSEMBLY
Removal / installation · Vehicles built from Jan 2006
| 1. REMOVE NO. 3 HEATER CONTROL KNOB |
![]() ![]() |
Disengage the 2 claws and remove the No. 3 heater control knob.
for Boost vent:

Disengage the 2 claws and disconnect the connector.
Remove the gear.

Remove the bulb.

| 2. REMOVE HEATER CONTROL BASE SUB-ASSEMBLY |
![]() ![]() |
Disengage the 2 claws and remove the heater control base.
Remove the bulb.

| 3. REMOVE HEATER CONTROL SUB-ASSEMBLY |
![]() ![]() |
Disengage the 2 claws and remove the heater control.
Remove the bulb.




