2005-2008 Yaris · Service Manual BODY ELECTRICAL

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built from Aug 2005


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

HINT:
The items in the table below can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current setting before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


Entry and start system:
Display (Item)
Default
Function
Setting
Park Wait Time (Waiting time to permit opening door after locking)
3.0s
Sets waiting time to permit opening door after door is locked with entry lock function
1.0s / 2.0s / 3.0s / 5.5s
Back Open Mode (Back door opening operation when vehicle is locked)
LONG
Makes back door lock, unlock switch operation available
LONG / TWICE / OFF
Key Lo-Batt Wrn (Warn when key battery becomes weak)
ON
Warns driver that key's battery power is low
ON / OFF


Key Cancel
The key cancel operation disables the following functions:
  1. Entry Start
  2. Entry Unlock / Lock
  3. Entry Back Door Open
  4. Key Lock-in Prevention
  5. Warning
  1. The operation procedures are as follows:
    Precondition:
    Ignition switch off, driver side door closed and unlocked

    1. Unlock the driver side door once with the UNLOCK switch of the key.

    2. Open the driver door within 5 seconds.

    3. Unlock the driver side door twice with the UNLOCK switch of the key within 5 seconds.

    4. Repeat open → close twice for the driver door within 30 seconds, and open again.
      (Driver door: Open → Close → Open → Close → Open)

    5. Unlock the driver side door twice with the UNLOCK switch of the key within 5 seconds.

    6. Repeat open → close once for the driver door within 30 seconds, and open again.
      (Driver door: Open → Close → Open)

    7. Close the driver door within 5 seconds.
      When key cancel is activated, the wireless door lock buzzer sounds twice.
      To return to the original condition, perform the procedures again. When returned to the original condition, the wireless door lock buzzer sounds once.

← HOW TO PROCEED WITH TROUBLESHOOTING (from Aug 2005)PROBLEM SYMPTOMS TABLE (Aug 2005 – Dec 2005) →