2005-2008 Yaris · Service Manual BODY ELECTRICAL

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Aug 2005


INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY
  1. Disconnect the engine oil pressure switch connector.

  1. Using an ohmmeter, check the resistance between the engine oil pressure switch terminal and body ground.

    Standard resistance (Engine stopped):
    Below 1 Ω

    Standard resistance (Engine idling):
    10 kΩ or higher

    HINT:
    If the value is not as specified, replace the engine oil pressure switch assembly.

← INSTALLATION (from Jan 2006)COMPONENTS (from Nov 2005) →