2005-2008 Yaris · Service Manual ENGINE

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Nov 2006


CHECK DTC

  1. A107926E01
    Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG) and turn thetester ON.

  3. Select the following menu items: Body / Body ECU / DTC.

  4. Check DTCs and then write them down.

    HINT:
    For further information about using the intelligent tester, refer to the instruction manual.

  5. Confirm the details of the DTCs.


CLEAR DTC (using the intelligent tester)
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG) (do not start the engine) and turn the tester ON.

  3. Select the following menu items: Body / Body ECU / DTC / Clear.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

  4. Erase DTCs by pressing the YES button on the tester.

    HINT:
    For further information about using the intelligent tester, refer to the instruction manual.


CLEAR DTC (not using the intelligent tester)
  1. Remove the ECU-B fuse from the engine room R/B for more than 60 seconds, or disconnect the negative battery cable for more than 60 seconds.

← DIAGNOSIS SYSTEM (from Nov 2006)DATA LIST / ACTIVE TEST (from Nov 2006) →