SYSTEM DESCRIPTION
Troubleshooting · Vehicles built from Aug 2005
| POWER WINDOW CONTROL SYSTEM DESCRIPTION |
The power window control system controls the power window UP / DOWN function using the regulator motors. The main controls of this system are: the power window regulator master switch, which is built into the driver side door, and the power window regulator switch, which is built into the passenger side door. Pressing the regulator switch or either of the switches on the master switch transmits an UP / DOWN signal to the corresponding power window regulator motor.
| FUNCTION OF MAIN COMPONENT |
| Component |
Outline |
| Power Window Regulator Master Switch Assembly |
Controls power window operation for both windows When window lock switch set to lock position, window operation is will only possible with master switch |
| Power Window Regulator Switch Assembly |
Located on passenger side door This switch controls window operation for passenger side window |
| Power Window Regulator Motor Assembly |
Receives switch signals and changes signals into motor activation to change window position Also uses two hall-ICs in regulator motor to detect window position and jamming (Only for driver side window) |
| SYSTEM FUNCTION |
The power window control system has the following functions:
Function
Outline
Manual UP / DOWN function
- Driver side power window:
Function that raises window while power window master regulator switch is pulled up, and lowers window while pushed halfway down (window stops as soon as switch is released)
- Passenger side power window:
Function that raises window while power window regulator switch is pulled up, and lowers window while pushed down (window stops as soon as switch is released)
AUTO UP/DOWN function
Function that enables window of driver side door to be fully opened or closed by one full push or pull of power window master regulator switch
Jam protection function
Function that automatically stops power window and moves it downward if object is jammed in power window
jam protection function works for AUTO UP and even for manual UP operation
Remote control function
Function that allows power window regulator master switch to control manual UP and DOWN operations of front passenger side window
Key-off operation function
Function that makes it possible to operate power window for approximately 45 seconds after ignition switch is turned on (ACC) or off when driver door or front passenger side door has not been opened
Window lock function
Function where front passenger side power window operation is disabled when window lock switch on power window regulator master switch is pressed
Diagnosis
Function where power window regulator switch detects malfunctions in power window system and makes diagnosis
Power window regulator switch light blinks to inform driver of malfunction
Fail-safe
If pulse sensor(s) (Hall IC(s)) in power window regulator motor malfunctions, power window AUTO UP and DOWN function is disabled, but remote control function is active as long as micro computer built-in power window regulator operates normally
- Driver side power window: