2005-2008 Yaris · Service Manual BODY

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from Nov 2005


POWER WINDOW CONTROL SYSTEM DESCRIPTION
  1. The power window control system controls the power window UP / DOWN function using the regulator motors. The main controls of this system are: the power window regulator master switch, which is built into the driver side door, and the power window regulator switch, which is built into the passenger side door. Pressing the regulator switch or either of the switches on the master switch transmits an UP / DOWN signal to the corresponding power window regulator motor.


FUNCTION OF MAIN COMPONENT
Component
Outline
Power Window Regulator Master Switch Assembly
Controls power window operation for both windows
When window lock switch set to lock position, window operation is will only possible with master switch
Power Window Regulator Switch Assembly
Located on passenger side door
This switch controls window operation for passenger side window
Power Window Regulator Motor Assembly
Receives switch signals and changes signals into motor activation to change window position
Also uses two hall-ICs in regulator motor to detect window position and jamming (Only for driver side window)

SYSTEM FUNCTION
  1. The power window control system has the following functions:

    Function
    Outline
    Manual UP / DOWN function
    1. Driver side power window:
      Function that raises window while power window master regulator switch is pulled up, and lowers window while pushed halfway down (window stops as soon as switch is released)
    1. Passenger side power window:
      Function that raises window while power window regulator switch is pulled up, and lowers window while pushed down (window stops as soon as switch is released)
    AUTO UP/DOWN function
    Function that enables window of driver side door to be fully opened or closed by one full push or pull of power window master regulator switch
    Jam protection function
    Function that automatically stops power window and moves it downward if object is jammed in power window
    jam protection function works for AUTO UP and even for manual UP operation
    Remote control function
    Function that allows power window regulator master switch to control manual UP and DOWN operations of front passenger side window
    Key-off operation function
    Function that makes it possible to operate power window for approximately 45 seconds after ignition switch is turned on (ACC) or off when driver door or front passenger side door has not been opened
    Window lock function
    Function where front passenger side power window operation is disabled when window lock switch on power window regulator master switch is pressed
    Fail-safe
    If pulse sensor(s) (Hall IC(s)) in power window regulator motor malfunctions, power window AUTO UP and DOWN function is disabled, but remote control function is active as long as micro computer built-in power window regulator operates normally

← SYSTEM DIAGRAM (from Nov 2005)HOW TO PROCEED WITH TROUBLESHOOTING (from Nov 2005) →