DATA LIST / ACTIVE TEST
System information · Vehicles built from Nov 2006
| DATA LIST |
- HINT:
- Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Read the DATA LIST in accordance with the display on the tester.
Theft Warning ECU: Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
Hood Curtesy Switch
Engine hood courtesy switch signal/ON or OFF
ON: Engine hood is open
OFF: Engine hood is closed
-
IG SW
Ignition switch signal/ON or OFF
ON: Engine switch is in ON or START position
OFF: Engine switch is in LOCK or ACC position
-
Alarm Trigger
Alarm Trigger
D CRTSY: Alarms are caused by door courtesy light switch
D POS: Alarms are caused by door position switch
H CRTSY: Alarms are caused by hood courtesy switch
L CRTSY: Alarms are caused by back door courtesy switch
IG SW: Alarms are caused by engine switch
OPEN: Alarms are caused by open circuit
NO SIG: No signals
-
Warning by Horn
Warning by horn/ON or OFF
ON: When switched from armed state to alarm sounding state
OFF: When switched from alarm sounding state to armed state or disarmed state
-
Main Body ECU: Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
D Door Courtesy SW
Driver side door courtesy switch signal / ON or OFF
ON: Driver side door is open
OFF: Driver side door is closed
-
D Lock Pos SW
Driver side door unlock detection switch signal / ON or OFF
ON: Driver side door is unlocked
OFF: Driver side door is locked
-
P Door Courtesy SW
Passenger side door courtesy switch signal / ON or OFF
ON: Passenger side door is open
OFF: Passenger side door is closed
-
P Lock Pos SW
Passenger side door unlock detection switch signal / ON or OFF
ON: Passenger side door is unlocked
OFF: Passenger side door is locked
-
BK Dor Courtesy SW
Back door courtesy switch/ON or OFF
ON: Back door is open
OFF: Back door is closed
-
ACC SW
ACC switch signal/ON or OFF
ON: Engine switch is in ACC position
OFF: Engine switch is in LOCK position
-
| ACTIVE TEST |
- HINT:
- Performing the intelligent tester ACTIVE TEST allows a relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to shorten the labor time. The DATA LIST can be displayed during the ACTIVE TEST.
Connect the intelligent tester with CAN VIM to the DLC3.
Turn the ignition switch ON.
Perform the ACTIVE TEST according to the instructions on the tester.
Theft Warning ECU: Tester Display
Test Part
Control Range
Security Indicator
Security indicator ON/OFF
-
Security Horn
Security horn ON/OFF
-
Main Body ECU: Tester Display
Test Part
Control Range
Vehicle Horn
Vehicle horn ON/OFF
-