REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY UPPER |
| 2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD) |
![]() ![]() |
Slightly deform the upper part of the glove compartment door assembly to release the 2 stoppers and open the glove compartment door assembly until it becomes horizontal.
Pull the glove compartment door assembly out horizontally to disengage the hinge portion and remove the glove compartment door assembly.

- NOTICE:
- Pull the glove compartment door out horizontally, otherwise, installation failure caused by excessive play around the hinge portion will result.
| 3. REMOVE TRANSMISSION CONTROL ECU ASSEMBLY (for LHD) |
![]() ![]() |
Disconnect the 3 connectors.
Remove the 2 bolts.

Disengage the clip and remove the transmission control ECU.
| 4. REMOVE TRANSMISSION CONTROL ECU ASSEMBLY (for RHD) |
![]() ![]() |
Disconnect the 3 connectors.
Remove the bolt and screw, then remove the transmission control ECU.




