2005-2008 Yaris · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL TRANSMISSION CONTROL ECU ASSEMBLY (for LHD)

C125984
  1. Engage the clip and install the transmission control ECU.

  1. Install the 2 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. C121119
    Connect the 3 connectors.


2. INSTALL TRANSMISSION CONTROL ECU ASSEMBLY (for RHD)

C127600
  1. Install the transmission control ECU with the bolt and screw.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. C121120
    Connect the 3 connectors.


3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

B105352
  1. Engage the claw of the hinge portion in the horizontal direction to install the glove compartment door assembly.

    NOTICE:
    Engage the claw in the horizontal direction, otherwise, installation failure caused by excessive play around the hinge portion will result.

  1. B108202
    Slightly deform the upper portion of the glove compartment door assembly to engage the stopper.


4. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY UPPER
(Click here)

5. INITIALIZATION OF MULTI-MODE MANUAL TRANSMISSION ECU
(Click here)

6. LEARNING OF MULTI-MODE MANUAL TRANSMISSION SYSTEM
(Click here)

7. SYNCHRONIZATION POSITION CALIBRATION
(Click here)
← REMOVAL (from Nov 2005)COMPONENTS (from Nov 2006) →