2005-2008 Yaris · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Nov 2005


1. REMOVE FR DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

F100232
  1. Using SST, remove the front differential case front tapered roller bearing.

    SST
    09950-00020  
    09950-00030  

    HINT:
    Set the claw of SST to the bearing inner race at the indented part of the differential case.


2. REMOVE FR DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

  1. G021404E03
    Using SST, remove the front differential case rear tapered roller bearing.
    SST
    09950-00020  
    09950-00030  


3. REMOVE FRONT DIFFERENTIAL RING GEAR

  1. G021405E03
    Place matchmarks on the front differential ring gear and the front differential case.

  1. G021406
    Remove the 6 bolts. Using a hammer, remove the front differential ring gear from the front differential case.


4. REMOVE FRONT DIFFERENTIAL CASE

  1. G021407
    Using a pin punch and hammer, remove the pinion shaft slotted spring pin.

  1. G021408
    Remove the pinion shaft from the differential case.

  1. Remove the 2 pinion gears, 2 side gears and the 4 thrust washers from each gear.

← COMPONENTS (from Nov 2005)REASSEMBLY (from Nov 2005) →