REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE NO. 1 AIR CLEANER HOSE |
Loosen the hose clamp and disconnect the No. 1 air cleaner hose.

Disconnect the 2 fuel hoses.
Loosen the 2 clips and disconnect the No. 1 air cleaner hose.
| 3. REMOVE AIR CLEANER ASSEMBLY |
![]() ![]() |
Remove the air cleaner filter element from the air cleaner.
| 4. REMOVE BATTERY HOLD DOWN CLAMP |
| 5. REMOVE BATTERY |
| 6. REMOVE BATTERY TRAY |
| 7. REMOVE BATTERY CARRIER |
Remove the 5 bolts and the battery carrier.

| 8. REMOVE SHIFT STROKE SENSOR |
![]() ![]() |
Disconnect the wire harness clamp.
Disconnect the shift stroke sensor connector.
Remove the 2 screws and the shift stroke sensor from the shift and select actuator.
Remove the O-ring from the shift stroke sensor.


