INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT SHIFT STROKE SENSOR |
![]() ![]() |
Connect 3 dry batteries of 1.5 V in series.
Connect the battery positive (+) lead to terminal A and the negative (-) lead to terminal B.
Turn the sensor arm and check the voltage between terminals B and C.

- Reference: Voltage (Power source voltage at 4.5 V):
Sensor angle
Terminal (B - C) output voltage
55°
4.05 V
0°
2.25 V
-55°
0.45 V
- Reference: Voltage (Power source voltage at 4.7 to 5.3 V):
Sensor angle
Terminal (B - C) output voltage
55°
4.5 V
0°
2.5 V
-55°
0.5 V
- NOTICE:
- Do not apply more than 6 V.
- Do not drop the clutch stroke sensor. If dropped, replace it with a new one.
- Do not apply more than 6 V.

