2005-2008 Yaris · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT SELECT STROKE SENSOR

C114018E01
  1. Connect the 3 dry batteries of 1.5 V in series.

  1. Connect the battery positive (+) lead to terminal A and the negative (-) lead to terminal B.

  1. C114019E01
    Turn the sensor arm and check the voltage between terminals B and C.

    Reference: Voltage (Power source voltage at 4.5 V):
    Sensor angle
    Terminal (B - C) output voltage
    55 °
    4.05 V
    0°
    2.25 V
    -55°
    0.45 V

    Voltage (Power source voltage at 4.7 to 5.3V):
    Sensor angle
    Terminal (B - C) output voltage
    55 °
    4.5 V
    0°
    2.5 V
    -55°
    0.5 V

    NOTICE:
    1. Do not apply more than 6 V.
    2. Do not drop the clutch stroke sensor. If dropped, replace it with a new one.

    If the voltage is not as specified, replace the stroke sensor.

← REMOVAL (from Nov 2005)INSTALLATION (from Nov 2005) →