2005-2008 Yaris · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE AIR CLEANER INLET NO.1 (for 2SZ-FE)

C127624
  1. Remove the air cleaner inlet No. 1.


3. REMOVE BATTERY HOLD DOWN CLAMP

4. REMOVE BATTERY

5. REMOVE BATTERY TRAY

6. REMOVE BATTERY CARRIER (for 1KR-FE)

C106985
  1. Remove the 4 bolts and the battery carrier.


7. REMOVE BATTERY CARRIER (for 2SZ-FE)

C106370
  1. Remove the 5 bolts and the battery carrier.


8. REMOVE SELECT STROKE SENSOR

C127599
  1. Remove the bolt and separate the wire harness bracket.

  1. C112892
    Disconnect the select stroke sensor connector.

  1. Remove the 2 screws and select stroke sensor from the shift and select actuator.

  1. Remove the O-ring from the select stroke sensor.

← COMPONENTS (from Nov 2005)INSPECTION (from Nov 2005) →