2005-2008 Yaris · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Nov 2006


1. INSTALL LICENSE PLATE LIGHT ASSEMBLY

B160132

HINT:
Use the same procedure for the opposite side.

  1. Engage the 2 claws and install the license plate light.


2. INSTALL REAR FOG LIGHT ASSEMBLY LH

  1. B160131
    Engage the 2 claws and install the rear fog light.

  1. Install the 2 nuts.


3. INSTALL REAR FOG LIGHT ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.


4. INSTALL NO. 2 REAR BUMPER REINFORCEMENT

  1. B163736
    Hook the No. 2 rear bumper reinforcement onto the 2 body hooks.


5. INSTALL REAR BUMPER REINFORCEMENT

  1. B160129
    Hook the 2 arms onto the 2 body hooks.

  1. Install the rear bumper reinforcement with the 6 bolts.

    Torque:
    19 N*m{ 195 kgf*cm , 14 ft.*lbf }


6. INSTALL REAR BUMPER SIDE RETAINER LH

  1. B114390
    Engage the 2 claws and install the rear bumper side retainer.

  1. Install the screw.


7. INSTALL REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.


8. INSTALL REAR BUMPER COVER

  1. B160128
    Connect the 2 rear fog light connectors and the 2 license plate light connectors.

  1. Install the 4 clamps.

  1. B160126
    Engage the 4 claws and install the rear bumper cover.

  1. B160127
    Engage the 8 claws.

  1. B160123
    Install the 2 bolts.

  1. Install the clip.

  1. B160122E01
    Remove the protective tape.


9. INSTALL NO. 1 FLOOR UNDER COVER

  1. B163735
    Install the No. 1 floor under cover with the 5 clips.


10. INSTALL REAR BUMPER SIDE SEAL LH

  1. B160121
    Engage the claw and install the rear bumper side seal with the 3 clips.


11. INSTALL REAR BUMPER SIDE SEAL RH

HINT:
Use the same procedure as for the LH side.

← REMOVAL (from Nov 2006)COMPONENTS (from Jan 2006) →