REMOVAL
Removal / installation · Vehicles built from Aug 2005
- NOTICE:
- Always use "Torx" socket wrench E10 when removing the rear seat.
| 1. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim) |
Remove the 2 package tray trim suspenders.

Remove the 5 pieces of hook tape.
Disengage the 2 claws and remove the package tray trim.
| 2. REMOVE DECK BOARD SUB-ASSEMBLY (w/ Deck Board) |
Release the 2 knobs and remove the deck board.

| 3. REMOVE SPARE WHEEL COVER ASSEMBLY (w/ Deck Board) |
Remove the spare wheel cover.

| 4. REMOVE DECK FLOOR BOX (w/ Deck Board) |
Release the 2 knobs and remove the deck floor box.

| 5. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Deck Board) |
Remove the rear floor carpet.

| 6. REMOVE NO. 1 REAR SEAT LEG COVER |
Disengage the 4 claws in the sequence shown in the illustration and remove the No. 1 rear seat leg cover.

| 7. REMOVE REAR SEAT ASSEMBLY |
Using "Torx" socket wrench E10, remove the 2 bolts and pull up the rear seat cushion.

Using "Torx" socket wrench E10, remove the 4 bolts and the rear seat.

