DISASSEMBLY
Removal / installation · Vehicles built from Aug 2005
- CAUTION:
- Wear protective gloves. Sharp surfaces on the rear seat cushion frame and the rear seatback frame could cause injuries to your hands.
| 1.
REMOVE REAR SEAT INNER BELT ASSEMBLY
|
 |
- Remove the belt from the band.
Remove the bolt and the rear seat inner belt.
| 2.
REMOVE REAR SEAT SIDE HINGE COVER |
 |
- HINT:
- Use the same procedure as for the opposite side.
Disengage the 4 claws and remove the rear seat side hinge cover.
| 3.
REMOVE REAR SEAT CUSHION ASSEMBLY |
 |
- Using "Torx" socket wrench T45, remove the 2 bolts, the 2 spacers and the rear seat cushion.
| 4.
REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY |
 |
- Remove the 4 hog rings.
Disengage the 7 hooks and remove the rear seat cushion cover pad.
| 5.
REMOVE REAR SEAT HEADREST ASSEMBLY |
 |
- Push in the lock button of the rear seat headrest support and remove the rear seat headrest.
| 6.
REMOVE REAR SEAT LOCK STRIKER COVER |
 |
- Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the rear seat lock striker cover.
| 7.
REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY |
 |
- Remove the 2 screws.
Disconnect the rear seat reclining control cable and the rear seat slide control cable and remove the rear seat lock control lever.
| 8.
REMOVE REAR SEAT HEADREST SUPPORT |
 |
- w/ Tether Anchor Cover:
Disengage the 2 claws and open the cover.
- Remove the screw and the tether anchor cover.
- Remove the rear seatback cover band.
- Remove the 5 hog rings.
- Unfasten the 2 zippers.
- Disengage the 2 claws and remove the rear seat headrest support.
- HINT:
- Use the same procedure for both sides.
| 9.
REMOVE REAR SEATBACK COVER PAD SUB-ASSEMBLY |
 |
- Remove the rear seatback cover pad.
| 10.
REMOVE REAR SEAT UNDER TRAY COVER |
 |
- Using a clip remover, remove the 4 clips and the rear seat under tray cover.
| 11.
REMOVE REAR SEAT RECLINING OUTSIDE COVER LH |
 |
- Remove the screw and the rear seat reclining outside cover.
| 12.
REMOVE REAR SEAT RECLINING OUTSIDE COVER RH |
 |
- Remove the screw and the rear seat reclining outside cover.
| 13.
REMOVE REAR SEAT RECLINING INSIDE COVER LH |
 |
- Disengage the 2 claws and remove the rear seat reclining inside cover.
| 14.
REMOVE REAR SEAT RECLINING INSIDE COVER RH |
 |
- Disengage the 2 claws and remove the rear seat reclining inside cover.
| 15.
REMOVE RECLINING ADJUSTER INSIDE COVER |
 |
- Remove the screw.
Disengage the claw and remove the reclining adjuster inside cover.
| 16.
REMOVE REAR SEAT RECLINING CONTROL CABLE |
 |
- Remove the rear seat reclining control cable.
| 17.
REMOVE REAR SEAT SLIDE CONTROL CABLE |
 |
- Remove the rear seat slide control cable.
- Remove the 3 clips.
| 18.
REMOVE REAR SEAT TRACK ASSEMBLY LH |
 |
- Remove the 2 nuts and the rear seat track.
| 19.
REMOVE REAR SEAT TRACK ASSEMBLY RH |
 |
- Remove the 2 nuts and the rear seat track.