DISASSEMBLY
Removal / installation · Vehicles built from Nov 2005
- CAUTION:
- Wear protective gloves. Sharp surfaces on the rear seat cushion frame and the rear seatback frame could cause injuries to your hands.
| 1. REMOVE REAR SEAT INNER BELT ASSEMBLY |
Remove the belt from the rear seat cushion band.

Remove the bolt and the rear seat inner belt.
| 2. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY LH |
Remove the belt from the rear seat cushion band.

Remove the bolt and the rear center seat inner belt.
| 3. REMOVE REAR SEAT CUSHION OUTER COVER |
Disengage the 3 claws and remove the rear seat cushion outer cover.

| 4. REMOVE REAR SEAT CUSHION INNER COVER |
Disengage the 3 claws and remove the rear seat cushion inner cover.

| 5. REMOVE REAR SEAT CUSHION ASSEMBLY |
Using "Torx" socket wrench T40, remove the 2 bolts and the rear seat cushion.

| 6. REMOVE REAR SEAT CUSHION SIDE OUTER COVER |
Disengage the 2 claws and remove the 2 retainers.

Disengage the claw and remove the rear seat cushion side outer cover.

| 7. REMOVE REAR SEAT CUSHION SIDE INNER COVER |
Disengage the 2 claws and remove the 2 retainers.

Disengage the claw and remove the rear seat cushion side inner cover.

| 8. REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY |
Disengage the 9 hooks and remove the rear seat cushion cover pad.

| 9. REMOVE REAR SEAT LEG SUB-ASSEMBLY |
Using "Torx" socket wrench T40, remove the 2 bolts and the rear seat leg.

Disengage the 4 claws and remove the 4 retainers.

| 10. REMOVE REAR SEAT HEADREST ASSEMBLY |
Push in the lock button of the rear seat headrest support and remove the rear seat headrest.

| 11. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY |
Push in the lock button of the rear seat headrest support and remove the rear center seat headrest.

| 12. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY |
Remove the cover.

Remove the screw and the rear seat lock control lever.

| 13. REMOVE REAR SEAT CUSHION UNDER COVER |
Disengage the 4 clips and remove the rear seatback cover.

Disengage the 6 claws and remove the rear seat cushion under cover.

| 14. REMOVE REAR SEAT RECLINING OUTER COVER |
Disengage the 2 claws and remove the rear seat reclining outer cover.

| 15. REMOVE REAR SEAT RECLINING INNER COVER |
Using "Torx" socket wrench T25, remove the screw.

Disengage the claw and remove the rear seat reclining inner cover.
| 16. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY RH |
Remove the nut and the rear center seat inner belt.

| 17. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY |
Disengage the 3 hooks.

Remove the rear seatback board.

| 18. REMOVE REAR SEAT HEADREST SUPPORT |
![]() ![]() |
- HINT:
- Use the same procedure to remove all the rear seat headrest supports.
Using a screwdriver, disengage the 2 claws and remove the rear seat headrest support.
| 19. REMOVE REAR SEATBACK COVER PAD SUB-ASSEMBLY |
Disengage the 2 hooks and remove the rear seatback cover pad.

| 20. REMOVE REAR SEAT RECLINING COVER |
Disengage the 2 claws and remove the rear seat reclining cover.

| 21. REMOVE NO. 2 SEAT ADJUSTER CONTROL CABLE ASSEMBLY |
Using a clip remover, remove the 5 clips.

Disconnect the 2 cables.
Disengage the 2 claws and remove the No. 2 seat adjuster control cable.

