2005-2008 Yaris · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Nov 2006


INSPECT FRONT DIFFERENTIAL PINION THRUST WASHER

C068517
  1. Using a micrometer, measure the thickness of the front differential pinion thrust washer.

    Minimum thickness:
    0.94 mm (0.03701 in.)

    If the thickness is less than the minimum, replace the front differential pinion thrust washer.


INSPECT NO. 1 FRONT DIFFERENTIAL PINION SHAFT

C068518
  1. Using a micrometer, measure the outer diameter of No. 1 front differential pinion shaft.

    Minimum outer diameter:
    16.982 mm (0.6685 in.)

    If the outer diameter is less than the minimum, replace the No. 1 front differential pinion shaft.

← DISASSEMBLY (from Nov 2006)REASSEMBLY (from Nov 2006) →