INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1. TEMPORARILY TIGHTEN FRONT SUSPENSION LOWER ARM |
![]() ![]() |
Provisionally tighten the lower arm with the 2 bolts.
Install the lower arm onto the steering knuckle with a new castle nut.

- Torque:
- 98 N*m{ 1,000 kgf*cm , 72 ft.*lbf }
- NOTICE:
- If the holes for the clip are not aligned, tighten the nut by a further turn of up to 60°.
Install a new clip.
| 2. INSTALL FRONT WHEEL |
- Torque:
- 103 N*m{ 1,050 kgf*cm , 76 ft.*lbf }
| 3. STABILIZE SUSPENSION |
Lower the vehicle from the jack.
Bounce the vehicle up and down several times to stabilize the suspension.
| 4. FULLY TIGHTEN FRONT SUSPENSION LOWER ARM |
![]() ![]() |
Fully tighten the 2 bolts.
- Torque:
- Bolt A:
- 137 N*m{ 1,397 kgf*cm , 101 ft.*lbf }
- Bolt B:
- 160 N*m{ 1,631 kgf*cm , 118 ft.*lbf }
| 5. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT |


