INSPECTION
Inspection · Vehicles built from Aug 2005
| INSPECT FRONT SUSPENSION LOWER ARM |
![]() ![]() |
As shown in the illustration, flip the ball joint stud back and forth 5 times before installing the nut.
Using a torque wrench, turn the nut continuously at a rate of 2 to 4 seconds per turn and take the torque reading on the 5th turn.
- Torque:
- 0.78 to 3.43 N*m{ 8 to 35 kgf*cm , 6.9 to 30 in.*lbf }
Check for any cracks and grease leakage on the ball joint dust cover.


