INSTALLATION
Removal / installation · Vehicles built from Nov 2006
| 1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY |
![]() ![]() |
Install the clutch release cylinder with the 2 bolts.
- Torque:
- 12 N*m{ 120 kgf*cm , 8.7 ft.*lbf }
| 2. CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE |
![]() ![]() |
Using SST, connect the flexible hose tube.
- SST
- 09023-00101
- Torque:
- for use without SST:
- 15 N*m{ 154 kgf*cm , 11 ft.*lbf }
- for use with SST:
- 14 N*m{ 143 kgf*cm , 10 ft.*lbf }
- HINT:
- Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).
- This torque value is effective when SST is parallel to a torque wrench.
- Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).
| 3. BLEED CLUTCH PIPE LINE |
Fill the brake reservoir tank with brake fluid and bleed the clutch system.
- Torque:
- 8.3 N*m{ 85 kgf*cm , 73 in.*lbf }
| 4. INSPECT FOR CLUTCH FLUID LEAK |



