2005-2008 Yaris · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from Nov 2006


1. INSTALL RELEASE CYLINDER BLEEDER PLUG

Torque:
8.3 N*m{ 85 kgf*cm , 73 in.*lbf }


2. INSTALL CLUTCH RELEASE CYLINDER KIT
  1. Install the bleeder plug cap onto the bleeder plug.

  1. Install a new spring onto the cylinder body.

  1. CL00672E01
    Coat a new piston with lithium soap base glycol grease, as shown in the illustration.

  1. Install the piston onto the cylinder body.

    NOTICE:
    Do not damage the inside of the cylinder body.

  1. Install the push rod onto the cylinder body.

  1. Install a new boot onto the cylinder body.

← DISASSEMBLY (from Nov 2006)INSTALLATION (from Nov 2006) →