REMOVAL
Removal / installation · Vehicles built from Nov 2006
- HINT:
- The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
| 1. REMOVE SIDE MUDGUARD |
Remove the screw.

Using a screwdriver, remove the 8 retainers.
Using an infrared light, heat the double-sided adhesive tape remaining on the side mudguard.

- HINT:
- Heat at 40 to 60°C (104 to 140°F) for 1 to 2 minutes.
Disengage the 8 clips and remove the side mudguard.
