2005-2008 Yaris · Service Manual BRAKE

INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT YAW RATE AND DECELERATION SENSOR
  1. Inspect the yaw rate and deceleration sensor. If any of the following apply, replace the yaw rate and deceleration sensor with a new one:

    1. The surface of the yaw rate and deceleration sensor is cracked, dented, or chipped.
    2. The connector is scratched, cracked, or damaged.
    3. The yaw rate and deceleration sensor has been dropped.

← REMOVAL (from Nov 2005)INSTALLATION (from Nov 2005) →