REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
| 3. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle) |
![]() ![]() |
Disengage the 6 claws and remove the shifting hole cover.
| 4. REMOVE CONSOLE BOX REAR COVER |
![]() ![]() |
Disengage the 8 claws and remove the console box rear cover.
| 5. REMOVE CONSOLE BOX CARPET |
![]() ![]() |
Remove the console box carpet.
| 6. REMOVE REAR CONSOLE BOX ASSEMBLY |
![]() ![]() |
Remove the bolt and disengage the 2 clips to remove the console box.
| 7. REMOVE PARKING BRAKE SWITCH |
Disconnect the parking brake switch connector.
Remove the screw and remove the parking brake switch.

| 8. REMOVE PARKING BRAKE EQUALIZER |
![]() ![]() |
Remove the wire adjusting nut and disconnect the parking brake cable.
Remove the parking brake equalizer.
| 9. REMOVE PARKING BRAKE LEVER |
![]() ![]() |
Remove the 2 bolts and parking brake lever.






