2005-2008 Yaris · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Aug 2005 – Dec 2005

Versions by build date: Aug 2005 – Dec 2005 from Jan 2006


1. INSTALL HEATED OXYGEN SENSOR

A115424
  1. Using SST, install the sensor onto the front exhaust pipe.

    SST
    09224-00010  

    Torque:
    44 N*m{ 449 kgf*cm , 32 ft.*lbf }

  1. Pass the sensor connector through the floor panel and install the grommet.

  1. Connect the sensor connector.


2. INSTALL CONSOLE BOX ASSEMBLY REAR

C116873
  1. Engage the 2 clips and install the console box with the bolt.


3. INSTALL CONSOLE BOX REAR COVER

C109006E01
  1. Engage the 8 claws to install the console box rear cover.


4. INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle)

C109005E01
  1. Engage the 6 claws to install the shifting hole cover.


5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }


7. CHECK FOR EXHAUST GAS LEAKAGE
← INSPECTION (from Aug 2005)INSTALLATION (from Jan 2006) →