INSTALLATION
Removal / installation · Vehicles built from Jan 2006
Versions by build date: Aug 2005 – Dec 2005 from Jan 2006
| 1.
INSTALL HEATED OXYGEN SENSOR |
 |
Using SST, install the sensor onto the front exhaust pipe.
- SST
- 09224-00010
-
Torque:
- 44 N*m{
449 kgf*cm
, 32 ft.*lbf
}
Pass the sensor connector through the floor panel and install the grommet.
Connect the sensor connector.
| 2.
INSTALL CONSOLE BOX ASSEMBLY REAR (for Hatchback)
|
 |
Engage the 2 clips and install the console box with the bolt.
| 3.
INSTALL INSTRUMENT PAD LOWER LH (for Sedan)
|
 |
- Engage the claw and 3 clips and install the instrument pad lower.
Install screw <I>.
| 4.
INSTALL REAR CONSOLE BOX ASSEMBLY (for Sedan)
|
 |
- Engage the 4 claws and install the rear console box.
Install the 2 bolts and 2 screws.
Connect the clamp.
| 5.
INSTALL REAR CONSOLE BOX ASSEMBLY (for Hatchback)
|
 |
Engage the 8 claws to install the console box rear cover.
| 6.
INSTALL CONSOLE BOX CARPET (for Sedan)
|
 |
- Install the console box carpet.
| 7.
INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Sedan)
|
 |
- Connect the connector.
Engage the 3 clips and 3 claws and install the console upper rear panel.
| 8.
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan)
|
 |
- Engage the 5 clips and the claw and install the upper console panel.
| 9.
INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Hatchback)
|
 |
Engage the 6 claws to install the shifting hole cover.
| 10.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
|
| 11.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
|
 |
- Install the shift lever knob.
| 12.
INSTALL INSTRUMENT PANEL FINISH PANEL END LH (for Sedan)
|
 |
Engage the 6 claws and 3 clips and install the instrument panel finish panel end LH.
| 13.
INSTALL INSTRUMENT PANEL FINISH PANEL LOWER CENTER (for Sedan)
|
 |
Engage the 2 claws and 2 clips and install the instrument panel finish panel lower center.
| 14.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}
| 15.
CHECK FOR EXHAUST GAS LEAKAGE |
|