2005-2008 Yaris · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Nov 2006


INSPECT ENGINE COOLANT TEMPERATURE SENSOR

A107631E06
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Condition
      Specified Condition
      Approximately 20°C (68°F)
      2.32 k to 2.59 kΩ
      Approximately 80°C (176°F)
      0.310 k to 0.326 kΩ

      NOTICE:
      When checking the engine coolant temperature sensor in water, keep the terminals dry. After the check, wipe the sensor dry.

      If the resistance is not as specified, replace the engine coolant temperature sensor.

← REMOVAL (from Nov 2006)INSTALLATION (from Nov 2006) →