2005-2008 Yaris · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Nov 2006


INSPECT CRANKSHAFT POSITION SENSOR

  1. Check the resistance.

    1. A158224E01
      Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Temperature
      Specified Condition
      Cold
      985 to 1600 Ω
      Hot
      1265 to 1890 Ω

      HINT:
      In the table above, the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50 °C (14 to 122 °F). Hot means approximately 50 to 100 °C (122 to 212 °F).

      If the resistance is not as specified, replace the crankshaft position sensor.

← REMOVAL (from Nov 2006)INSTALLATION (from Nov 2006) →