INSTALLATION
Removal / installation · Vehicles built from Nov 2006
| 1.
INSTALL CRANKSHAFT POSITION SENSOR |
 |
- Apply a light coat of engine oil to the O-ring on the crankshaft position sensor.
- Install the crankshaft position sensor with the bolt.
-
Torque:
- 10 N*m{
102 kgf*cm
, 7 ft.*lbf
}
Connect the crankshaft position sensor connector.
| 2.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}
| 4.
INSTALL ENGINE UNDER COVER RH |
 |
-
Torque:
- 5.0 N*m{
51 kgf*cm
, 44 in.*lbf
}