Removal / installation · Vehicles built from Aug 2005
1.
REMOVE WITH HEAD TAPER SCREW PLUG NO. 1
Using a 10 mm socket hexagon wrench, remove the taper screw plug and the gasket.
2.
REMOVE VALVE LIFTER
HINT:
Keep the valve lifters in the correct order so that they can be returned to their original locations when reassembled.
3.
REMOVE WITH HEAD TAPER SCREW PLUG NO. 2
Using an 8 mm hexagon wrench, remove the taper screw plug.
4.
REMOVE OIL CONTROL VALVE FILTER
5.
REMOVE INTAKE VALVE
Using SST, compress the valve spring and remove the 2 retainer locks, retainer and valve spring.
SST
09202-70020
(09202-00010)
HINT:
Keep the valves, valve springs, spring seats and spring retainers in the correct order so that they can be returned to their original locations when reassembled.
6.
REMOVE EXHAUST VALVE
Using SST, compress the valve spring and remove the 2 retainer locks, retainer and valve spring.
SST
09202-70020
(09202-00010)
HINT:
Keep the valves, valve springs, spring seats and spring retainers in the correct order so that they can be returned to their original locations when reassembled.
7.
REMOVE VALVE STEM OIL SEAL
Using needle-nose pliers, remove the oil seal.
8.
REMOVE VALVE SPRING SEAT
Using compressed air and a magnetic finger, remove the valve spring seats.
9.
REMOVE STUD BOLT
Using "Torx" socket wrenches E5 and E7, remove the 7 stud bolts.