2005-2008 Yaris · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Aug 2005


1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

E109069
  1. Connect the connector and install the rear combination light socket and wire.


2. INSTALL REAR COMBINATION LIGHT BULB

E108444
  1. Install the rear combination light bulb into the socket and wire.

  1. E108443
    Turn the rear combination light socket and wire, in the direction indicated by the arrow in the illustration, to install them.

  1. E113824
    Install the rear combination light bulb into the light socket.

  1. E113823
    Turn the rear combination light bulb socket and bulb, in the direction indicated by the arrow in the illustration, to install them.

  1. E108441
    Turn the 2 rear combination light bulbs, in the direction indicated by the arrows in the illustration, to install them.

  1. E114435
    Engage the 2 claws and install the rear combination light socket and wire.


3. INSTALL REAR COMBINATION LIGHT BODY GASKET

E113820
  1. Install a new rear combination light body gasket.


4. INSTALL REAR COMBINATION LIGHT ASSEMBLY

E113819
  1. Install the tail light (rear combination light) assembly onto the vehicle.

  1. E108436
    Connect the connector.

  1. Install the 2 nuts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }


5. INSTALL REAR COMBINATION LIGHT COVER

E113818
  1. Engage the 6 claws and install the rear combination light cover.


6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

← REMOVAL (from Aug 2005)COMPONENTS (from Nov 2006) →