2005-2008 Yaris · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Jan 2006


1. INSTALL BACK UP LIGHT BULB

  1. E127144
    Install the back up light bulb into the socket.

  1. Turn the back up light socket, in the directions indicated by the arrow in the illustration, to install them.


2. INSTALL TURN SIGNAL LIGHT BULB

  1. E127143
    Install the turn signal light bulb into the socket.

  1. Turn the turn signal light socket, in the directions indicated by the arrow in the illustration, to install them.


3. INSTALL TAIL LIGHT AND STOP LIGHT BULB

  1. E127142
    Install the tail light and stop light bulb into the socket.

  1. Turn the tail light and stop light bulb socket, in the directions indicated by the arrow in the illustration, to install them.


4. INSTALL REAR COMBINATION LIGHT BODY GASKET

  1. E125483
    Install a new rear combination light body gasket.


5. INSTALL REAR COMBINATION LIGHT ASSEMBLY

  1. E127141
    Install the rear combination light assembly onto the vehicle.

  1. E127140
    Connect the connector.

  1. Install the 2 nuts.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }


6. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER

  1. E127139
    Engage the 5 clips and install the luggage compartment trim inner cover.


7. INSTALL REAR FLOOR FINISH PLATE

  1. E127138
    Engage the 2 clips and install the rear floor finish plate.


8. INSTALL DECK FLOOR BOX LH

  1. E129683
    Install the deck floor box and the deck side box door.


9. INSTALL DECK FLOOR BOX RH

HINT:
Use the same procedure as for the LH side.


10. INSTALL SPARE WHEEL COVER ASSEMBLY

  1. E129682
    Install the spar wheel cover assembly.


11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

  1. E129681
    Install the luggage compartment floor mat.


12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

← REMOVAL (from Jan 2006)COMPONENTS (from Aug 2005) →