REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE MAP LIGHT ASSEMBLY |
![]() ![]() |
Using a roof moulding remover, disengage the 4 claws.
Disconnect the connector, and remove the map light.
| 3. REMOVE MAP LIGHT BULB |
![]() ![]() |
Turn the 2 map light sockets and bulbs, in the direction indicated by the arrows in the illustration, to remove them.
Remove the 2 map light bulbs from the light socket.



