INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL HAZARD WARNING SIGNAL SWITCH |
![]() ![]() |
Engage the 2 claws and the hazard warning signal switch.
| 2. INSTALL INSTRUMENT PANEL FINISH PANEL END LH |
![]() ![]() |
with CD player
Connect the connector.
Engage the 4 claws and 3 clips and install the instrument panel finish panel end LH.
Except CD player

Connect the connector.
Engage the 5 claws and 3 clips and install the instrument panel finish panel end LH.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }


