REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE STEERING COLUMN COVER SUPPORT (w/ Entry and Start System) |
![]() ![]() |
Disengage the 4 claws and remove the steering column cover support.
| 3. REMOVE STEERING COLUMN COVER |
![]() ![]() |
Turn the steering wheel to the right and remove the screw indicated in the illustration.
Turn the steering wheel to the left and remove the screw indicated in the illustration.

Remove the screw indicated in the illustration and remove the steering column cover.

| 4. REMOVE WIPER SWITCH |
![]() ![]() |
Disconnect the 2 connectors.
Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the wiper switch.
- NOTICE:
- Do not press the claw too hard, as it may be damaged.



