REMOVAL
Removal / installation · Vehicles built from Jan 2006
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE STEERING COLUMN COVER |
Remove the 3 screws, disengage the 2 claws, release the tilt lever and remove the steering column lower cover.

Disengage the claw and remove the steering column upper cover.

| 3. REMOVE WIPER SWITCH |
Disconnect the 2 connectors.

Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the wiper switch.
- NOTICE:
- Do not press the claw too hard, as it may be damaged.
