INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
![]() ![]() |
Install the windshield washer motor and pump onto the packing of the washer jar.
| 2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY |
![]() ![]() |
Install the windshield washer jar.
Install the 2 bolts.

- Torque:
- 5.5 N*m{ 56 kgf*cm , 48 in.*lbf }
Connect the 2 washer hoses.
Connect the 2 connectors.
Connect the 2 harness clamps.
| 3. FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID |
Connect the washer hose to the washer motor and pump, and fill the washer jar with washer fluid.
| 4. INSTALL RH HEADLIGHT ASSEMBLY |
![]() ![]() |
w/ Headlight leveling:
Connect the 4 connectors.
w/o Headlight leveling:
Connect the 3 connectors.
Install the headlight with the 3 screws.
| 5. INSTALL FRONT BUMPER COVER |
w/ Front Spoiler:

Install the 2 clips and the 4 screw grommets.
w/o Front Spoiler:

Install the 2 clips and the screw grommet.
w/ Fog Light:
Connect the 2 fog light connectors.

Engage the 6 claws and install the front bumper cover.
w/o Fog Light:

Engage the 6 claws and install the front bumper cover.
w/ Front Spoiler:

Install the 7 clips.
Install the 2 screw grommets.
Tighten the 3 screws.
w/o Front Spoiler:

Install the 7 clips.
Install the 2 screw grommets.
Tighten the 8 screws.
Remove the protective tape.

| 6. INSTALL FRONT SPOILER COVER RH (w/ Front Spoiler) |
Install the front spoiler cover with the 4 screws.

| 7. INSTALL FRONT SPOILER COVER LH (w/ Front Spoiler) |
Install the front spoiler cover with the 5 screws.

| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



