REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT SPOILER COVER LH (w/ Front Spoiler) |
Remove the 5 screws and the front spoiler cover.

| 3. REMOVE FRONT SPOILER COVER RH (w/ Front Spoiler) |
Remove the 4 screws and the front spoiler cover.

| 4. REMOVE FRONT BUMPER COVER |
Apply protective tape as shown in the illustration.

w/ Front Spoiler:

Remove the 3 screws.
Remove the 2 screw grommets.
Remove the 7 clips.
w/o Front Spoiler:

Remove the 8 screws.
Remove the 2 screw grommets.
Remove the 7 clips.
w/ Fog Light:

Using a screwdriver with its tip wrapped in protective tape, disengage the 6 claws and remove the front bumper cover.
Disconnect the 2 fog light connectors.
w/o Fog Light:

Using a screwdriver with its tip wrapped in protective tape, disengage the 6 claws and remove the front bumper cover.
w/ Front Spoiler:

Remove the 2 clips and the 4 screw grommets.
w/o Front Spoiler:

Remove the 2 clips and the screw grommet.
| 5. REMOVE RH HEADLIGHT ASSEMBLY |
![]() ![]() |
Remove the 3 screws.
w/ Headlight leveling:
Disconnect the 4 connectors, then remove the headlight.
w/o Headlight leveling:
Disconnect the 3 connectors, then remove the headlight.
| 6. DRAIN WASHER FLUID |
Disconnect the 2 washer hoses from the windshield washer motor and pump, and drain the washer fluid.
| 7. REMOVE WINDSHIELD WASHER JAR ASSEMBLY |
![]() ![]() |
Disconnect the 2 harness clamps.
Disconnect the 2 connectors.
Remove the 2 bolts.
Disconnect the 2 washer hoses and remove the windshield washer jar.
| 8. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
![]() ![]() |
Pull the washer motor and pump out of the packing of the washer jar.



